EPA · subbasin 02040106 · discharge permits by parameter

Iron, total [as Fe] in subbasin 02040106

• 51Permits carrying a limit
• 0With a recorded exceedance
• 6,273Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

51 of the permits in subbasin 02040106 carry a numeric limit on Iron, total [as Fe], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 6,273 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 02040106

• Solids, total suspended 123
• Solids, settleable 3
• Oil & Grease 78
• Nitrogen, total [as N] 87
• Nitrogen, ammonia total [as N] 15
• Nitrogen, Kjeldahl, total [as N] 12
• Nitrite + Nitrate total [as N] 36
• Phosphorus, total [as P] 89
• Sulfate, total [as SO4] 3
• Copper, total [as Cu] 12
• Lead, total [as Pb] 24
• Manganese, total [as Mn] 4
• Zinc, total [as Zn] 35
• Aluminum, total [as Al] 48
• Flow, in conduit or thru treatment plant 31
• Chlorine, total residual 10
• Nitrogen, Total 3
• Phosphorus, Total 3
• Alkalinity - Acidity [as CaCO3] 9
• Solids, total dissolved 12

Iron, total [as Fe] nationwide · Subbasin 02040106, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 02040106 with limits on Iron, total [as Fe]. It lists 51 permits with a limit on this parameter and 38 permits with a recorded violation of this parameter.