EPA · subbasin 04100006 · discharge permits by parameter

Molybdenum, sludge, total, dry weight [as Mo] in subbasin 04100006

• 5Permits carrying a limit
• 0With a recorded exceedance
• 2,731Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

5 of the permits in subbasin 04100006 carry a numeric limit on Molybdenum, sludge, total, dry weight [as Mo], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 2,731 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 04100006

• Cadmium, in bottom deposits [dry wgt] 3
• Copper in bottom deposits [dry wgt] 3
• Lead, total dry weight [as Pb] 3
• Nickel, tot in bottom deposits [dry wgt] 3
• Zinc in bottom deposits [dry wgt] 3
• Zinc, total recoverable 3
• Copper, total recoverable 3
• Selenium, dry weight 5
• Turbidity [severity] 16
• E. coli, MTEC-MF 22
• Flow, in conduit or thru treatment plant 20
• Chlorine, total residual 15
• Mercury, total low level 3
• Biosolids weight indluding admixtures 13
• Sludge weight, dry 4
• Solids, total dissolved- 180 deg. C 4
• Mercury, tot in bot deposits [dry wgt] 3
• Overflows 8
• BOD, carbonaceous [5 day, 20 C] 24
• Sludge waste from secondary clarifiers 15

Molybdenum, sludge, total, dry weight [as Mo] nationwide · Subbasin 04100006, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 04100006 with limits on the pollutant parameter Molybdenum, sludge, total, dry weight [as Mo]. It lists 5 permits in this watershed with a limit on this parameter and 3 permits in this watershed with a recorded violation of this parameter.