EPA · subbasin 04150101 · discharge permits by parameter
Oil & Grease in subbasin 04150101
- 10Permits carrying a limit
- 5With a recorded exceedance
- 12,997Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
10 of the permits in subbasin 04150101 carry a numeric limit on Oil & Grease, and 5 of those have a recorded exceedance. Nationwide the same parameter appears in 12,997 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 04150101
- Temperature, water deg. centigrade 11
- Temperature, water deg. fahrenheit 10
- Flow rate 7
- BOD, 5-day, 20 deg. C 20
- pH 25
- Solids, total suspended 26
- Solids, settleable 20
- Phosphorus, total [as P] 11
- Chromium, total [as Cr] 3
- Zinc, total [as Zn] 7
- Phenolics, total recoverable 3
- Toluene 7
- Benzene 7
- Ethylbenzene 7
- Flow, in conduit or thru treatment plant 20
- Chlorine, total residual 12
- Coliform, fecal general 10
- BOD, 5-day, percent removal 16
- Solids, suspended percent removal 16
- Chemical Oxygen Demand [COD] 7
Oil & Grease nationwide · Subbasin 04150101, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 04150101 with limits on the pollutant parameter Oil & Grease. The register lists 10 permits with a limit on this parameter and 8 permits with a recorded violation of this parameter.