EPA · subbasin 05020006 · discharge permits by parameter

Oil & Grease in subbasin 05020006

• 49Permits carrying a limit
• 4With a recorded exceedance
• 12,997Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

49 of the permits in subbasin 05020006 carry a numeric limit on Oil & Grease, and 4 of those have a recorded exceedance. Nationwide the same parameter appears in 12,997 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 05020006

• Temperature, water deg. fahrenheit 6
• Specific conductance 10
• Oxygen, dissolved [DO] 27
• BOD, 5-day, 20 deg. C 11
• Oxygen demand, chem. [high level] [COD] 25
• pH 86
• Alkalinity, total [as CaCO3] 19
• Acidity, total [as CaCO3] 19
• Solids, total suspended 117
• Solids, settleable 16
• Nitrogen, total [as N] 71
• Nitrogen, ammonia total [as N] 30
• Nitrite + Nitrate total [as N] 9
• Phosphorus, total [as P] 72
• Hardness, total [as CaCO3] 3
• Chloride [as Cl] 5
• Sulfate, total [as SO4] 15
• Arsenic, total [as As] 5
• Cadmium, total [as Cd] 5
• Chromium, dissolved [as Cr] 3

Oil & Grease nationwide · Subbasin 05020006, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 05020006 with limits on the pollutant parameter Oil & Grease. The register lists 49 permits with a limit on this parameter and 44 permits with a recorded violation of this parameter.