EPA · subbasin 05040003 · discharge permits by parameter

Molybdenum, sludge, total, dry weight [as Mo] in subbasin 05040003

• 7Permits carrying a limit
• 1With a recorded exceedance
• 2,731Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

7 of the permits in subbasin 05040003 carry a numeric limit on Molybdenum, sludge, total, dry weight [as Mo], and 1 of those have a recorded exceedance. Nationwide the same parameter appears in 2,731 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 05040003

• Selenium, dry weight 7
• Chromium, hexavalent dissolved [as Cr] 8
• Odor, atmospheric [severity] 6
• Turbidity [severity] 41
• Coliform, fecal MF, MFC broth, 44.5 C 7
• E. coli, MTEC-MF 45
• Toluene 3
• Benzene 3
• Flow, in conduit or thru treatment plant 36
• Chlorine, total residual 34
• Mercury, total low level 8
• Biosolids weight indluding admixtures 10
• Fecal coliform in sludge, CFU/gram 5
• Sludge weight, dry 7
• Solids, total dissolved- 180 deg. C 12
• Solids, total, percent 3
• Mercury, tot in bot deposits [dry wgt] 7
• Overflows 13
• BOD, carbonaceous [5 day, 20 C] 50
• Sludge waste from secondary clarifiers 42

Molybdenum, sludge, total, dry weight [as Mo] nationwide · Subbasin 05040003, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 05040003 with limits on the pollutant parameter Molybdenum, sludge, total, dry weight [as Mo]. The register lists 7 permits with a limit on this parameter and 3 permits with a recorded violation of this parameter.