EPA · subbasin 05040004 · discharge permits by parameter
Sludge weight, dry in subbasin 05040004
- 7Permits carrying a limit
- 0With a recorded exceedance
- 432Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
7 of the permits in subbasin 05040004 carry a numeric limit on Sludge weight, dry, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 432 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 05040004
- Selenium, dry weight 6
- Chromium, hexavalent dissolved [as Cr] 5
- Turbidity [severity] 30
- E. coli, MTEC-MF 34
- Rainfall 15
- Flow, in conduit or thru treatment plant 35
- Chlorine, total residual 19
- Mercury, total low level 11
- Biosolids weight indluding admixtures 12
- Fecal coliform in sludge, CFU/gram 4
- Toxicity [acute], Ceriodaphnia dubia 7
- Toxicity [acute], Pimephales promelas [Fathead Minnow] 5
- pH, maximum 4
- pH, minimum 4
- Solids, total dissolved- 180 deg. C 14
- Mercury, tot in bot deposits [dry wgt] 6
- Overflows 10
- Molybdenum, sludge, total, dry weight [as Mo] 6
- BOD, carbonaceous [5 day, 20 C] 40
- Sludge waste from secondary clarifiers 32
Sludge weight, dry nationwide · Subbasin 05040004, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 05040004 with limits on the pollutant parameter Sludge weight, dry. In this watershed, 7 permits have a limit on this parameter, and 3 permits have a recorded violation of this parameter.