EPA · subbasin 05040006 · discharge permits by parameter
pH in subbasin 05040006
- 45Permits carrying a limit
- 17With a recorded exceedance
- 58,899Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
45 of the permits in subbasin 05040006 carry a numeric limit on pH, and 17 of those have a recorded exceedance. Nationwide the same parameter appears in 58,899 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 05040006
- Temperature, water deg. centigrade 26
- Flow rate 24
- Color, spectrophoto-metric filter 6
- Oxygen, dissolved [DO] 37
- BOD, 5-day, 20 deg. C 9
- Oxygen demand, chem. [low level] [COD] 5
- Solids, total suspended 47
- Oil and grease [soxhlet extr.] tot. 3
- Oil and grease, hexane extr method 20
- Nitrogen, ammonia total [as N] 38
- Nitrogen, ammonia in bottom deposits 5
- Nitrogen, Kjeldahl, total [as N] 16
- Nitrite + Nitrate total [as N] 20
- Phosphorus, total [as P] 21
- Phosphorous, total, in bottom deposits 5
- Phosphate, ortho, dissolved [as P] 7
- Cyanide, free-water plus wastewaters 4
- Cyanide, total [as CN] 4
- Hardness, total [as CaCO3] 13
- Potassium, in bottom deposits 5
pH nationwide · Subbasin 05040006, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 05040006 with limits on the pollutant parameter pH. It lists 45 permits in this watershed with a limit on this parameter and 33 permits in this watershed with a recorded violation of this parameter.