EPA · subbasin 05080002 · discharge permits by parameter

Oil and grease, hexane extr method in subbasin 05080002

• 38Permits carrying a limit
• 16With a recorded exceedance
• 2,470Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

38 of the permits in subbasin 05080002 carry a numeric limit on Oil and grease, hexane extr method, and 16 of those have a recorded exceedance. Nationwide the same parameter appears in 2,470 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 05080002

• Temperature, water deg. centigrade 66
• Temperature, water deg. fahrenheit 3
• Flow rate 46
• Color, spectrophoto-metric filter 5
• Oxygen, dissolved [DO] 94
• BOD, 5-day, 20 deg. C 3
• Oxygen demand, chem. [low level] [COD] 4
• pH 112
• Solids, total suspended 104
• Oil and grease [soxhlet extr.] tot. 4
• Nitrogen, ammonia total [as N] 89
• Nitrogen, ammonia in bottom deposits 16
• Nitrogen, Kjeldahl, total [as N] 46
• Nitrite + Nitrate total [as N] 47
• Nitrite plus nitrate in bottom deposits 3
• Phosphorus, total [as P] 57
• Phosphorous, total, in bottom deposits 15
• Phosphate, ortho, dissolved [as P] 11
• Cyanide, free-water plus wastewaters 5
• Cyanide, total [as CN] 15

Oil and grease, hexane extr method nationwide · Subbasin 05080002, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 05080002 with limits on the pollutant parameter Oil and grease, hexane extr method. It lists 38 permits in this watershed with a limit on this parameter and 23 permits in this watershed with a recorded violation of this parameter.