EPA · subbasin 07110002 · discharge permits by parameter

Sodium, total [as Na] in subbasin 07110002

• 5Permits carrying a limit
• 0With a recorded exceedance
• 671Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

5 of the permits in subbasin 07110002 carry a numeric limit on Sodium, total [as Na], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 671 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 07110002

• BOD, 5-day, 20 deg. C 6
• pH 17
• Solids, total suspended 14
• Solids, settleable 5
• Oil and grease [soxhlet extr.] tot. 15
• Nitrogen, ammonia total [as N] 6
• Nitrogen, Kjeldahl, total [as N] 3
• Phosphorus, total [as P] 6
• Chloride, dissolved in water 3
• Application rate area sprayed 5
• Flow, in conduit or thru treatment plant 13
• E. coli 4
• Nitrogen, Kjeldahl, total [TKN] [water] 3
• Application rate, gallons spray irrigation 4
• Freeboard 4
• Precipitation volume 4
• Spray irrigation 5
• BOD, 5-day, percent removal 4
• Solids, suspended percent removal 4
• Spray irrigation, application rate 5

Sodium, total [as Na] nationwide · Subbasin 07110002, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 07110002 with limits on Sodium, total [as Na]. It lists 5 permits in this watershed with a limit on this parameter and 4 permits in this watershed with a recorded violation of this parameter.