EPA · subbasin 07140101 · discharge permits by parameter
Naphthalene in subbasin 07140101
- 5Permits carrying a limit
- 0With a recorded exceedance
- 2,525Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
5 of the permits in subbasin 07140101 carry a numeric limit on Naphthalene, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 2,525 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 07140101
- Selenium, total [as Se] 9
- Chromium, hexavalent dissolved [as Cr] 5
- Oil and grease 11
- Temp. diff. between up/down stream deg. F 3
- Polynuclear Aromatic Hydrocarbons [PAHs] 3
- Benzene, ethylbenzene, toluene, xylene combination 4
- Phenolics, total recoverable 9
- Toluene 5
- Benzene 9
- Ethylbenzene 7
- Chloride 17
- Rainfall 18
- Application rate area sprayed 6
- Flow, in conduit or thru treatment plant 203
- Chlorine, total residual 108
- E. coli 83
- E. coli, colony forming units [CFU] 5
- Application rate, gallons spray irrigation 6
- Offensive Conditions 5
- Flow, total 3
Naphthalene nationwide · Subbasin 07140101, every permit
What this page shows
The page covers Clean Water Act discharge permits in watershed 07140101 with limits on Naphthalene. It lists 5 permits in this watershed with a limit on this parameter and 6 permits in this watershed with a recorded violation of this parameter.