EPA · subbasin 08010208 · discharge permits by parameter

Flow, in conduit or thru treatment plant in subbasin 08010208

• 33Permits carrying a limit
• 0With a recorded exceedance
• 40,755Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

33 of the permits in subbasin 08010208 carry a numeric limit on Flow, in conduit or thru treatment plant, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 40,755 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 08010208

• Oil & Grease 3
• Nitrogen, total [as N] 8
• Nitrogen, ammonia total [as N] 10
• Phosphorus, total [as P] 9
• Iron, total [as Fe] 9
• Lead, total [as Pb] 4
• Toluene 4
• Benzene 5
• Ethylbenzene 4
• Floating solids, waste or visible foam-visual 6
• Chlorine, total residual 14
• E. coli 10
• SSO, Dry Weather 9
• SSO, Wet Weather 9
• Release [Sewer], Dry Weather 8
• Release [Sewer], Wet Weather 8
• Bypass of Treatment Facility 8
• BOD, carbonaceous [5 day, 20 C] 8
• BOD, carbonaceous, percent removal 6
• BOD, 5-day, percent removal 3

Flow, in conduit or thru treatment plant nationwide · Subbasin 08010208, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 08010208 with limits on the pollutant parameter Flow, in conduit or thru treatment plant. The register lists 33 permits with a limit on this parameter and 27 permits with a recorded violation of this parameter.