EPA · subbasin 10090208 · discharge permits by parameter
Produced water, oil and grease in subbasin 10090208
- 15Permits carrying a limit
- 7With a recorded exceedance
- 625Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
15 of the permits in subbasin 10090208 carry a numeric limit on Produced water, oil and grease, and 7 of those have a recorded exceedance. Nationwide the same parameter appears in 625 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 10090208
- Fluoride, dissolved [as F] 4
- Arsenic, total recoverable 12
- Selenium, total recoverable 5
- Arsenic, total [as As] 4
- Barium, total [as Ba] 5
- Barium, total recoverable 11
- Iron, total [as Fe] 3
- Iron, dissolved [as Fe] 23
- Manganese, dissolved [as Mn] 5
- Radium 226, total 15
- Chloride 33
- Duration 5
- Chlorine, total residual 3
- E. coli 4
- Bicarbonate as [CaCO3] 16
- Solids, total dissolved 10
- Flow 37
- Flow, well water 5
- Sulfate 7
- Produced water, flow 4
Produced water, oil and grease nationwide · Subbasin 10090208, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 10090208 with limits on the pollutant parameter Produced water, oil and grease. The register lists 15 permits with a limit on this parameter and 15 permits with a recorded violation of this parameter.