EPA · subbasin 10120101 · discharge permits by parameter
pH in subbasin 10120101
- 25Permits carrying a limit
- 8With a recorded exceedance
- 58,899Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
25 of the permits in subbasin 10120101 carry a numeric limit on pH, and 8 of those have a recorded exceedance. Nationwide the same parameter appears in 58,899 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 10120101
- Specific conductance 23
- Alkalinity, total [as CaCO3] 23
- Calcium, dissolved [as Ca] 23
- Magnesium, dissolved [as Mg] 23
- Sodium, dissolved [as Na] 23
- Sodium adsorption ratio 13
- Arsenic, total recoverable 21
- Barium, total recoverable 21
- Iron, dissolved [as Fe] 25
- Radium 226 + radium 228, total 5
- Chloride 23
- Bicarbonate as [CaCO3] 23
- Sodium Absorption Ratio 10
- Flow 25
pH nationwide · Subbasin 10120101, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 10120101 with limits on the pollutant parameter pH. There are 25 permits in this watershed with a limit on this parameter and 21 permits in this watershed with a recorded violation of this parameter.