EPA · subbasin 10140101 · discharge permits by parameter
Flow rate in subbasin 10140101
- 19Permits carrying a limit
- 0With a recorded exceedance
- 3,490Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
19 of the permits in subbasin 10140101 carry a numeric limit on Flow rate, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 3,490 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 10140101
- Temperature, water deg. centigrade 24
- Conductivity 3
- BOD, 5-day, 20 deg. C 18
- pH 25
- Solids, total suspended 22
- Oil and grease, hexane extr method 5
- Oil & Grease 5
- Nitrogen, total [as N] 6
- Nitrogen, ammonia total [as N] 16
- Phosphorus, total [as P] 6
- Floating solids, waste or visible foam-visual 7
- Phenols 3
- Chlorine, total residual 5
- E. coli, colony forming units [CFU] 6
- Flow, total 14
- Solids, total dissolved 4
- Coliform, fecal general 3
- Coliform, total general 4
- Duration of discharge 16
- Flow, total 6
Flow rate nationwide · Subbasin 10140101, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 10140101 with limits on the pollutant parameter Flow rate. There are 19 permits in this watershed with a limit on this parameter and 12 permits in this watershed with a recorded violation of this parameter.