EPA · subbasin 11010001 · discharge permits by parameter
Iron, total recoverable in subbasin 11010001
- 39Permits carrying a limit
- 1With a recorded exceedance
- 4,424Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
39 of the permits in subbasin 11010001 carry a numeric limit on Iron, total recoverable, and 1 of those have a recorded exceedance. Nationwide the same parameter appears in 4,424 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 11010001
- pH 190
- Solids, total suspended 183
- Solids, settleable 7
- Oil and grease [soxhlet extr.] tot. 22
- Oil & Grease 3
- Nitrogen, total [as N] 8
- Nitrogen, ammonia total [as N] 150
- Nitrogen, Kjeldahl, total [as N] 5
- Nitrite + Nitrate total [as N] 8
- Phosphorus, total [as P] 159
- Aluminum, total recoverable 77
- Aluminum, dissolved [as Al] 4
- Chloride 5
- Application rate area sprayed 3
- Flow, in conduit or thru treatment plant 186
- Chlorine, total residual 122
- E. coli 123
- E. coli, colony forming units [CFU] 11
- Application rate, gallons spray irrigation 3
- Ammonia [as N] + unionized ammonia 14
Iron, total recoverable nationwide · Subbasin 11010001, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 11010001 with limits on the pollutant parameter Iron, total recoverable. It lists 39 permits with a limit on this parameter and 34 permits with a recorded violation of this parameter.