EPA · subbasin 11020005 · discharge permits by parameter

Iron, total [as Fe] in subbasin 11020005

• 4Permits carrying a limit
• 0With a recorded exceedance
• 6,273Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

4 of the permits in subbasin 11020005 carry a numeric limit on Iron, total [as Fe], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 6,273 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 11020005

• Plant capacity fact. percent of capacity 8
• BOD, 5-day, 20 deg. C 13
• pH 19
• Solids, total suspended 24
• Nitrogen, ammonia total [as N] 8
• Nitrogen, nitrite total [as N] 3
• Nitrogen, inorganic total 3
• Chloride [as Cl] 4
• Arsenic, total recoverable 6
• Iron, total recoverable 5
• Manganese, dissolved [as Mn] 4
• Cadmium, total recoverable 3
• Lead, total recoverable 3
• Molybdenum, total recoverable 3
• Selenium, potentially dissolvd 11
• Oil and grease 19
• Flow, in conduit or thru treatment plant 18
• Chlorine, total residual 13
• E. coli 10
• Sulfide-hydrogen sulfide [undissociated] 4

Iron, total [as Fe] nationwide · Subbasin 11020005, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 11020005 with limits on the pollutant parameter Iron, total [as Fe]. The register lists 4 permits with a limit on this parameter and 4 permits with a recorded violation of this parameter.