EPA · subbasin 12010002 · discharge permits by parameter
Compliance w/part 258 sludge requirement in subbasin 12010002
- 30Permits carrying a limit
- 0With a recorded exceedance
- 1,854Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
30 of the permits in subbasin 12010002 carry a numeric limit on Compliance w/part 258 sludge requirement, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 1,854 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 12010002
- Cadmium, dry weight 30
- Annual whole sludge application rate 30
- Ann. amt sludge disposed by other method 30
- Annual amt of sludge incinerated 30
- Annual sludge production, total 30
- Annual amount of sludge land applied 30
- Annual amt. sludge disposed surface unit 30
- Annual amt sludge disposed in landfill 30
- Annual amt sludge transported interstate 30
- Unit w/liner/leachate collection system 30
- Flow, in conduit or thru treatment plant 74
- Chlorine, total residual 36
- Boundary areas 30
- E. coli 44
- Whole Effluent Toxicity [WET] - P. promelas 4
- Solids, total dissolved 8
- Salmonella 30
- Mercury, total [as Hg] 42
- Molybdenum, sludge, total, dry weight [as Mo] 30
- Zinc, sludge, total, dry weight [as Zn] 30
Compliance w/part 258 sludge requirement nationwide · Subbasin 12010002, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 12010002 with limits on the parameter Compliance w/part 258 sludge requirement. This watershed has 30 permits with a limit on this parameter and 32 permits with a recorded violation of this parameter.