EPA · subbasin 12030105 · discharge permits by parameter
Mercury [Hg], in barite, dry weight in subbasin 12030105
- 4Permits carrying a limit
- 0With a recorded exceedance
- 306Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
4 of the permits in subbasin 12030105 carry a numeric limit on Mercury [Hg], in barite, dry weight, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 306 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 12030105
- Unit w/liner/leachate collection system 13
- Compliance w/part 258 sludge requirement 13
- Flow, in conduit or thru treatment plant 65
- Chlorine, total residual 12
- Boundary areas 13
- E. coli 17
- Salmonella 13
- Mercury, total [as Hg] 111
- Flow 4
- Cadmium [Cd], in barite, dry weight 4
- Molybdenum, sludge, total, dry weight [as Mo] 13
- Zinc, sludge, total, dry weight [as Zn] 13
- Lead, sludge, total, dry weight [as Pb] 13
- Nickel, sludge, total, dry weight [as Ni] 13
- Mercury, sludge, total, dry weight [as Hg] 13
- Chromium, sludge, total, dry weight [as Cr] 13
- Produced water, free oil 4
- BOD, carbonaceous [5 day, 20 C] 10
- Chemical Oxygen Demand [COD] 22
- Hydrocarbons, petroleum 4
Mercury [Hg], in barite, dry weight nationwide · Subbasin 12030105, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 12030105 with limits on Mercury [Hg], in barite, dry weight. The watershed has 4 permits with a limit on this parameter and 1 permit with a recorded violation of this parameter.