EPA · subbasin 12040203 · discharge permits by parameter
Molybdenum, sludge, total, dry weight [as Mo] in subbasin 12040203
- 15Permits carrying a limit
- 0With a recorded exceedance
- 2,731Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
15 of the permits in subbasin 12040203 carry a numeric limit on Molybdenum, sludge, total, dry weight [as Mo], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 2,731 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 12040203
- Flow, in conduit or thru treatment plant 54
- Chlorine, total residual 23
- Boundary areas 15
- E. coli 10
- 1,3-Dichloropropylene 6
- Whole Effluent Toxicity - Retest #3 5
- Enterococci 10
- Solids, total dissolved 4
- Salmonella 15
- Mercury, total [as Hg] 29
- Zinc, sludge, total, dry weight [as Zn] 15
- Lead, sludge, total, dry weight [as Pb] 15
- Nickel, sludge, total, dry weight [as Ni] 15
- Mercury, sludge, total, dry weight [as Hg] 15
- Chromium, sludge, total, dry weight [as Cr] 15
- 3,4-Benzofluoranthene 5
- BOD, carbonaceous [5 day, 20 C] 13
- pH range excursions, > 60 minutes 5
- pH range excursions, monthly total accum 5
- Pollutant table from 503.13 15
Molybdenum, sludge, total, dry weight [as Mo] nationwide · Subbasin 12040203, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 12040203 with limits on Molybdenum, sludge, total, dry weight [as Mo]. It lists 15 permits in this watershed with a limit on this parameter and 10 permits in this watershed with a recorded violation of this parameter.