EPA · subbasin 12070102 · discharge permits by parameter

Mercury, total [as Hg] in subbasin 12070102

• 7Permits carrying a limit
• 0With a recorded exceedance
• 5,569Nationwide

A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.

7 of the permits in subbasin 12070102 carry a numeric limit on Mercury, total [as Hg], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 5,569 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.

Permits

Other pollutants in subbasin 12070102

• Annual amt. sludge disposed surface unit 10
• Annual amt sludge disposed in landfill 10
• Annual amt sludge transported interstate 10
• Unit w/liner/leachate collection system 10
• Compliance w/part 258 sludge requirement 10
• Flow, in conduit or thru treatment plant 18
• Chlorine, total residual 4
• Boundary areas 10
• E. coli 7
• Salmonella 10
• Molybdenum, sludge, total, dry weight [as Mo] 10
• Zinc, sludge, total, dry weight [as Zn] 10
• Lead, sludge, total, dry weight [as Pb] 10
• Nickel, sludge, total, dry weight [as Ni] 10
• Mercury, sludge, total, dry weight [as Hg] 10
• Chromium, sludge, total, dry weight [as Cr] 10
• BOD, carbonaceous [5 day, 20 C] 3
• Pollutant table from 503.13 10
• Level of pathogen requirements achieved 10
• Description of pathogen option used 10

Mercury, total [as Hg] nationwide · Subbasin 12070102, every permit

What this page shows

This page covers Clean Water Act discharge permits in watershed 12070102 with limits on the pollutant parameter Mercury, total [as Hg]. The register lists 7 permits with a limit on this parameter and 3 permits with a recorded violation of this parameter.