EPA · subbasin 12090401 · discharge permits by parameter
Molybdenum, sludge, total, dry weight [as Mo] in subbasin 12090401
- 13Permits carrying a limit
- 0With a recorded exceedance
- 2,731Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
13 of the permits in subbasin 12090401 carry a numeric limit on Molybdenum, sludge, total, dry weight [as Mo], and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 2,731 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 12090401
- Annual amt sludge disposed in landfill 13
- Annual amt sludge transported interstate 13
- Unit w/liner/leachate collection system 13
- Compliance w/part 258 sludge requirement 13
- Flow, in conduit or thru treatment plant 23
- Chlorine, total residual 16
- Boundary areas 13
- E. coli 16
- Salmonella 13
- Mercury, total [as Hg] 17
- Zinc, sludge, total, dry weight [as Zn] 13
- Lead, sludge, total, dry weight [as Pb] 13
- Nickel, sludge, total, dry weight [as Ni] 13
- Mercury, sludge, total, dry weight [as Hg] 13
- Chromium, sludge, total, dry weight [as Cr] 13
- BOD, carbonaceous [5 day, 20 C] 5
- Pollutant table from 503.13 13
- Level of pathogen requirements achieved 13
- Description of pathogen option used 13
- Vector attraction reduction alternative used 13
Molybdenum, sludge, total, dry weight [as Mo] nationwide · Subbasin 12090401, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 12090401 with limits on the pollutant parameter Molybdenum, sludge, total, dry weight [as Mo]. It lists 13 permits in this watershed with a limit on this parameter and 14 permits in this watershed with a recorded violation of this parameter.