EPA · subbasin 16020204 · discharge permits by parameter
BTEX in subbasin 16020204
- 9Permits carrying a limit
- 2With a recorded exceedance
- 339Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
9 of the permits in subbasin 16020204 carry a numeric limit on BTEX, and 2 of those have a recorded exceedance. Nationwide the same parameter appears in 339 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 16020204
- Molybdenum, total recoverable 3
- Selenium, total [as Se] 8
- Oil and grease 53
- Phosphate, ortho [as P] 5
- Methyl tert-butyl ether [MTBE] 13
- Benzene, ethylbenzene, toluene, xylene combination 3
- Benzene 13
- Naphthalene 13
- Floating solids, waste or visible foam-visual 12
- Sanitary waste discharged-assessmnt 11
- Flow, in conduit or thru treatment plant 15
- Chlorine, total residual 9
- E. coli 5
- Total Petroleum Hydrocarbons - Diesel 11
- Total Petroleum Hydrocarbons - Gasoline 10
- Solids, total dissolved 11
- Solids, total dissolved [TDS] 6
- Mercury, total [as Hg] 10
- Mercury, total recoverable 3
- Organics, total toxic [TTO] 6
BTEX nationwide · Subbasin 16020204, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 16020204 with limits on the pollutant parameter BTEX. It lists 9 permits in watershed 16020204 with a limit on this parameter and 9 permits in watershed 16020204 with a recorded violation of this parameter.