EPA · subbasin 21010005 · discharge permits by parameter
Mercury, total [as Hg] in subbasin 21010005
- 29Permits carrying a limit
- 31With a recorded exceedance
- 5,569Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
29 of the permits in subbasin 21010005 carry a numeric limit on Mercury, total [as Hg], and 31 of those have a recorded exceedance. Nationwide the same parameter appears in 5,569 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 21010005
- Phenol 4
- Naphthalene 5
- Nitrogen, ammonia, total [as NH3] 19
- Surfactants [MBAS] 26
- Pentachlorophenol 10
- Flow, in conduit or thru treatment plant 47
- Chlorine, total residual 42
- Cyanide, free available 20
- Sulfide-hydrogen sulfide [undissociated] 18
- Whole Effluent Toxicity [WET] - P. promelas 20
- Whole Effluent Toxicity [WET] - D. magna 20
- Enterococci 19
- Solids, total dissolved 22
- Solids, total dissolved- 180 deg. C 7
- Coliform, fecal general 25
- Coliform, total general 18
- BOD, 5-day, percent removal 13
- Solids, suspended percent removal 13
- Chemical Oxygen Demand [COD] 8
- Ammonia & ammonium- total 20
Mercury, total [as Hg] nationwide · Subbasin 21010005, every permit
What this page shows
This page covers Clean Water Act discharge permits (EPA NPDES register) in watershed 21010005 with limits on Mercury, total [as Hg]. It lists 29 permits in this watershed with a limit on this parameter and 42 permits in this watershed with a recorded violation of this parameter.