EPA · discharge permits by pollutant and parameter

Turbidity, time above limit

• 58Permits carrying a limit
• 13With a recorded exceedance
• 2States

EPA identifies this parameter by code 61736. A permit listed here carries a numeric limit on turbidity, time above limit in its discharge; an exceedance is a monitoring result above that limit, as reported to EPA.

By state

• New York53
• California3

By watershed

The subbasins of the national Watershed Boundary Dataset carrying the most permits with a limit on turbidity, time above limit.

• Subbasin 0203010133
• Subbasin 020200057
• Subbasin 020401014
• Subbasin 020401024

Other pollutants

• Selenium, sludge solid 78
• Arsenic, sludge tot. dry wt [as As] 152
• Beryllium, sludge, tot. dry wt [as Be] 71
• Nitrogen [as NO3] sludge solid 78
• Solids, total, sludge, percent 38
• Ammonia [as N] + unionized ammonia 239
• Net rate of additionof heat 12
• Temp. diff. between intake and discharge 66
• Temp. diff. between intake and discharge 5
• Inorganic suspended solids 17
• Ultraviolet light dosage 119
• pH, maximum 549
• pH, minimum 455
• MARINE SANITATION DEVISE USED 101
• Bromochloromethane 4
• 4-Chloro-3-methylphenol 250
• Temp. difference, summer [deg. F] 25
• Temp. difference, winter [deg. F] 12
• 1,2,4-Trichlorobenzene, total 3
• Phenolic compounds, total 106

Permits

What this page shows

This page covers Clean Water Act discharge permits in the EPA NPDES register with limits on the pollutant parameter Turbidity, time above limit. It lists 58 permits with a limit on this parameter and 49 permits with a recorded violation of this parameter.