EPA · subbasin 12090401 · discharge permits by parameter
LC50 Pass/Fail Static 24Hr Acute Pimephales promelas in subbasin 12090401
- 4Permits carrying a limit
- 0With a recorded exceedance
- 1,679Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
4 of the permits in subbasin 12090401 carry a numeric limit on LC50 Pass/Fail Static 24Hr Acute Pimephales promelas, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 1,679 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 12090401
- Unit w/liner/leachate collection system 13
- Compliance w/part 258 sludge requirement 13
- Flow, in conduit or thru treatment plant 23
- Chlorine, total residual 16
- Boundary areas 13
- E. coli 16
- Salmonella 13
- Mercury, total [as Hg] 17
- Molybdenum, sludge, total, dry weight [as Mo] 13
- Zinc, sludge, total, dry weight [as Zn] 13
- Lead, sludge, total, dry weight [as Pb] 13
- Nickel, sludge, total, dry weight [as Ni] 13
- Mercury, sludge, total, dry weight [as Hg] 13
- Chromium, sludge, total, dry weight [as Cr] 13
- BOD, carbonaceous [5 day, 20 C] 5
- Pollutant table from 503.13 13
- Level of pathogen requirements achieved 13
- Description of pathogen option used 13
- Vector attraction reduction alternative used 13
- LC50 Pass/Fail Static 24Hr Acute D. Pulex 4
LC50 Pass/Fail Static 24Hr Acute Pimephales promelas nationwide · Subbasin 12090401, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 12090401 with limits on the pollutant parameter LC50 Pass/Fail Static 24Hr Acute Pimephales promelas. The watershed has 4 permits with a limit on this parameter and 3 permits with a recorded violation of this parameter.