EPA · subbasin 05060003 · discharge permits by parameter
Mercury, total low level in subbasin 05060003
- 10Permits carrying a limit
- 2With a recorded exceedance
- 490Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
10 of the permits in subbasin 05060003 carry a numeric limit on Mercury, total low level, and 2 of those have a recorded exceedance. Nationwide the same parameter appears in 490 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 05060003
- Cadmium, total recoverable 10
- Lead, total recoverable 11
- Chromium, total recoverable 10
- Copper, total recoverable 12
- Selenium, dry weight 9
- Chromium, hexavalent dissolved [as Cr] 9
- Turbidity [severity] 12
- E. coli, MTEC-MF 22
- Flow, in conduit or thru treatment plant 23
- Chlorine, total residual 9
- Biosolids weight indluding admixtures 11
- Fecal coliform in sludge, CFU/gram 6
- Cyanide, free available 3
- Sludge weight, dry 11
- pH, maximum 3
- pH, minimum 3
- Solids, total dissolved- 180 deg. C 12
- Mercury, tot in bot deposits [dry wgt] 9
- Overflows 13
- Molybdenum, sludge, total, dry weight [as Mo] 9
Mercury, total low level nationwide · Subbasin 05060003, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 05060003 with limits on Mercury, total low level. There are 10 permits in this watershed with a limit on this parameter, and 6 permits in this watershed with a recorded violation of this parameter.