EPA · subbasin 05060003 · discharge permits by parameter
Cyanide, free available in subbasin 05060003
- 3Permits carrying a limit
- 0With a recorded exceedance
- 374Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
3 of the permits in subbasin 05060003 carry a numeric limit on Cyanide, free available, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 374 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 05060003
- Chromium, total recoverable 10
- Copper, total recoverable 12
- Selenium, dry weight 9
- Chromium, hexavalent dissolved [as Cr] 9
- Turbidity [severity] 12
- E. coli, MTEC-MF 22
- Flow, in conduit or thru treatment plant 23
- Chlorine, total residual 9
- Mercury, total low level 10
- Biosolids weight indluding admixtures 11
- Fecal coliform in sludge, CFU/gram 6
- Sludge weight, dry 11
- pH, maximum 3
- pH, minimum 3
- Solids, total dissolved- 180 deg. C 12
- Mercury, tot in bot deposits [dry wgt] 9
- Overflows 13
- Molybdenum, sludge, total, dry weight [as Mo] 9
- BOD, carbonaceous [5 day, 20 C] 22
- Sludge waste from secondary clarifiers 15
Cyanide, free available nationwide · Subbasin 05060003, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 05060003 with limits on Cyanide, free available. It lists 3 permits in this watershed with a limit on this parameter and 1 permit with a recorded violation of this parameter.