EPA · subbasin 05060003 · discharge permits by parameter
Sludge weight, dry in subbasin 05060003
- 11Permits carrying a limit
- 0With a recorded exceedance
- 432Nationwide
A subbasin is a unit of the national Watershed Boundary Dataset, and water crosses state lines: a permit is placed here by the outfall EPA names as its representative discharge point.
11 of the permits in subbasin 05060003 carry a numeric limit on Sludge weight, dry, and 0 of those have a recorded exceedance. Nationwide the same parameter appears in 432 permits. A permit carrying several parameters is counted under each of them, so the parameter counts for one subbasin add up to more permits than it holds. The other parameters named in this subbasin are listed below.
Permits
Other pollutants in subbasin 05060003
- Chromium, total recoverable 10
- Copper, total recoverable 12
- Selenium, dry weight 9
- Chromium, hexavalent dissolved [as Cr] 9
- Turbidity [severity] 12
- E. coli, MTEC-MF 22
- Flow, in conduit or thru treatment plant 23
- Chlorine, total residual 9
- Mercury, total low level 10
- Biosolids weight indluding admixtures 11
- Fecal coliform in sludge, CFU/gram 6
- Cyanide, free available 3
- pH, maximum 3
- pH, minimum 3
- Solids, total dissolved- 180 deg. C 12
- Mercury, tot in bot deposits [dry wgt] 9
- Overflows 13
- Molybdenum, sludge, total, dry weight [as Mo] 9
- BOD, carbonaceous [5 day, 20 C] 22
- Sludge waste from secondary clarifiers 15
Sludge weight, dry nationwide · Subbasin 05060003, every permit
What this page shows
This page covers Clean Water Act discharge permits in watershed 05060003 with limits on the pollutant parameter Sludge weight, dry. It lists 11 permits in this watershed with a limit on this parameter, and 2 permits in this watershed with a recorded violation of this parameter.